Operation - Cuisinart Smart Stick CSB-175C Series Instruction Booklet

OPERATION

1. Press and hold the
LOCK/UNLOCK
.
button
No need to keep holding down the LOCK/UNLOCK button once
the blender is operating.
BLENDING
The specially designed blade blends, mixes and purées all kinds
of foods, including salad dressings, thick smoothies, powdered
drink products, soups and sauces. It can also be used to emulsify
mayonnaise.
This blade is designed to add minimal air to your mixture.
A gentle up-and-down motion lets you achieve the most flavorful,
full-bodied results. Be careful never to remove the blending shaft from
the liquid while in operation.
1. Connect the blending shaft to the motor body housing.
2. Plug electrical cord into a wall socket.
3. Immerse the blade end of blending shaft into mixture to be blended.
You can blend in the mixing cup, bowl, pot, saucepan or pitcher.
4. Simply slide the two-speed switch to LOW or HIGH, depending on
what you are blending.
5. To turn the blender on:
See Operation, illustrations 1, 2, 3 above.
a. Press and hold the LOCK/UNLOCK button.
b. Then press and hold the ON/OFF button.
c. Release the LOCK/UNLOCK button while continuing to hold down
the ON/OFF button.
NOTE: Do not continuously blend for longer than 60 seconds.
Release ON/OFF button for 20–30 seconds between 60-second
blending cycles.
6. Unplug immediately after use.
2. Then press and
hold the ON/OFF
button.
6
3. Release the LOCK/
UNLOCK button while
continuing to hold down
the ON/OFF button.