Cuisinart Smart Stick HB-400PC Instruction And Recipe Booklet page 10

Variable speed hand blender
Table of Contents

Advertisement

4.
Attach the lid to the food processor work bowl, and turn it
clockwise until it locks in position. To remove lid, turn
counterclockwise.
5.
Connect the motor body housing to the food processor work
bowl lid. (See Fig. 3, page 7.)
6.
Press the Unlock/On Button to unlock and power up the unit,
and then press the Variable Speed Control Button to select the
desired speed. The speed will gradually increase when you apply
more pressure while pressing the button.
NOTE: Due to the powerful motor provided with this unit, Cuisinart
recommends using one hand to steady the work bowl during
operation.
NOTE: Max operation duration time should be less than 1 minute,
and a 3-minute rest time must be maintained between two
consecutive cycles.
7.
When you have finished processing the food, stop the machine
by taking your finger off the Variable Speed Control Button.
WHEN THE BLADE STOPS MOVING
8.
9.
Remove the motor body housing from the food processor lid by
turning it counterclockwise.
10. Carefully remove the chopping/mixing blade, holding it by
gripping the upper plastic area of the blade.
THE BLADE ITSELF
11. Remove food with a spatula.
NOTE: Do not operate the food processor attachment without
food in the work bowl.
SLICING AND SHREDDING
1.
Place the food processor work bowl on a flat, sturdy surface,
such as a countertop.
2.
Place the stem in center of work bowl, over the metal blade shaft.
Choose desired side of the disc, slice or shred.
3.
Holding disc by outer edges, carefully place it over the stem,
with the side being used facing up. Disc can also be placed over
the stem by grasping the center hub on the disc.
4.
Attach the lid to the food processor work bowl, and turn it
clockwise until it locks in position. Place the pusher into the feed
tube opening on the work bowl cover.
5.
Connect the motor body housing to the food processor work
bowl lid. (See Fig. 3, page 7.)
6.
Evenly pack food in the feed tube for slicing and shredding.
The food to be processed will dictate the amount of pressure:
Use light pressure for soft foods, medium pressure for medium
foods, and firm pressure for harder foods. Always process with
even pressure.
.
10
, unplug the unit.
NEVER TOUCH

Advertisement

Table of Contents
loading

Table of Contents