Table of Contents
Advertisement
This machine must be grounded. Replacement of the power supply cable should only be
done by a qualified electrician. See page 5 for additional electrical information.
As received from the factory, your machine is ready to run at 110V operation. It can be switched to 220V
according to the schematic below.
receptacle that has a grounding conductor that is required.
110V WIRING
YELLOW
RED
GREEN
To register your machine online, visit RIKON at www.rikontools.com/warranty
please contact us at 877-884-5167 or email warranty@rikontools.com
WIRING DIAGRAM
The illustration on page 5 shows the type of 220V, 3-wire electrical plug and
BLACK
WHITE
NOTE: THE WIRES DEPICTED ARE LEADING INTO THE MOTOR
®
To take advantage of this warranty, or if you have any questions,
RED
GREEN
WARRANTY
16
220V WIRING
BLACK
YELLOW
WHITE
Advertisement
Table of Contents
