Table of Contents
Advertisement
Operating manual Manual Powder System SPRINT XE
5 Description
Electrical:
Mains (AC)
Frequency
Input power
Mains (AC) output terminal
Output voltage of gun
Output current of gun
Corona current limitation
Tribo current limitation
Pneumatic:
Compressed air connection
Connection hose diameter
Input air pressure
Air flow
Sum of dosing and feed air
Gun air
WAGNER injector type
Required compressed air quality as per
ISO 8573.1
WARNING
Exhaust air containing oil!
Risk of poisoning if inhaled.
Insufficient paint application quality.
4 The compressed air must meet the following quality requirements: (Quality
Standard 6.5.2 according to ISO 8573.1, 2010) 6.5.2 = particle density ≤ 5 mg/m³;
pressure dew point ≤ +7 °C; oil content ≤ 0.1 mg/m³
Ambient conditions:
When using low-melting powder varieties, an ambient temperature below 30 °C (86 °F) may
be necessary.
Volume measures:
for volumes specified in Nm
1.013 bar is referred to as a normal cubic meter.
Advertisements:
High voltage
Corona current
Tribo current
Recipes
Switch over from Tribo to Corona
Connectable spray gun types
20
90 VAC – 250 VAC
47 Hz – 63 Hz
maximum 110 W
Vibrator motor, maximum 70 W
maximum 22 Vpp
maximum 0.9 A
5 μA – 120 μA (adjustable in 1 µA steps)
greater than 12 μA
(EX: switching off of the unit)
G1/4"
18.5 x 12.5 mm
0.6 – 0.8 MPa; 6 – 8 bar; 87 – 116 psi
maximum 15 m
2 – 12 m
0.05 – 4.5 m
PI-F1, HiCoat ED pump F, PI-F1-S
6.5.2 according to ISO 8573.1, 2010
3
(standard cubic meters). One cubic meter of gas at 0 °C and
0 – 100 kV resolution 10 kV
0 – 120 µA resolution 5 – 20 µA
0 – 5 µA resolution 0.5 µA
50 preset
Automatic
WAGNER guns PEM-X1,
PEM-C4, PEM-C4-Ergo,
PEM-C4-Ergo FM, PEM-T3
3
/h; 529.63 cf/h
3
/h; 70.6 – 423.7 cf/h
3
/h; 1.765 – 158.9 cf/h
Order number 2354920 | Edition 01/2023
Advertisement
Table of Contents
