Table of Contents
Advertisement
Operating manual Manual Powder System SPRINT XE
7 Operation
7 OPERATION
7.1 TRAINING THE OPERATING PERSONNEL
– The operating personnel must be qualified to operate the entire system.
– The operating staff must be familiar with the potential risks associated with improper
behavior as well as the necessary protective devices and measures.
– Before work commences, the operating personnel must receive appropriate system
training.
7.2 TASKS
1. Ensure that:
4 the regular safety checks are carried out in accordance with chapter Safety Checks
[8 45];
4 commissioning is carried out in accordance with chapters Assembly of the manual
system [8 25] and Connecting the manual system [8 27].
7.2.1 Switching on the Manual System
A
To turn the power supply of the manual powder system on, set the mains switch (A) on the
back side of the control unit to position [I].
– After a few seconds the control unit is operational.
– The device switches to recipe 1 [Surface parts] after every restart.
– To switch the manual system off or on, actuate the [Standby] push button (2).
Note:
– The fluid air must be adjusted using the throttle (3), when first commissioning the
manual system.
– The control unit automatically recognizes the type of gun connected.
– There are 50 recipes available for the gun.
– When a Tribo gun is connected, the Tribo current scale is activated, while the high-
voltage supply and control unit are deactivated.
– All airs are only switched on once the manual gun's trigger has been actuated.
Order number 2354920 | Edition 01/2023
1
100
2x
2x
80
60
40
20
kV
3
P_02646
50
40
60
Tri
Cor
m /h
3
Ø
5
120
30
70
Tri
12
5.5
3.0
4
80
11
4.5
1.5
3
40
20
80
10
3.5
0.5
2
20
9
8
2.5
0.3
1
10
10
90
2.0
0.1
µA
0
%
100
%
SPRINT X
EPG
2
33
Advertisement
Table of Contents
