Table of Contents
Advertisement
Operating manual Manual Powder System SPRINT XE
7 Operation
7.5.2.2 Cleaning process when using multiple powder tanks
Info
For a paint change, all components of the powder feed system must be thoroughly
cleaned.
50
60
40
m /h
3
70
Ø
30
Tri
3.0
5.5
12
1.5
4.5
11
80
20
0.5
3.5
10
9
0.3
2.5
8
90
10
0.1
2.0
100
%
0
%
SP RI N T X
EPG
P_05051
1. Release the trigger lever on the spray gun.
ð The high voltage and the powder feed are deactivated.
2. Remove the injector from the holder to stop powder feed.
3. Hold the gun in the spray booth and start the flush function by pressing the [Flush]
button (17).
ð The injector and hoses are flushed.
4. Switch off control unit.
5. Loosen the powder feed hose from the powder injector and clean the spray gun and
the powder feed hose thoroughly.
6. Loosen the blue dosing air hose and the red feed air hose from the powder injector.
7. Disconnect the black fluid air hose from the powder tank.
8. Loosen the grounding cable from the powder tank.
9. Replace the powder tank.
10. Reconnect all the hoses and ground the powder tank by connecting to the grounding
cable.
Info
Proper fluidization is not possible with a damaged and/or clogged fluid base.
Order number 2354920 | Edition 01/2023
17
41
Advertisement
Table of Contents
