Function Introduction & Instructions For Use - GVM -B200C Manual

FUNCTION INTRODUCTION &
INSTRUCTIONS FOR USE
① Lighting mode:
There are six light modes:
CCT, HSI, RGB, color gel, light source match, light effect.
CCT mode:
In this mode you can adjustable color temperature and
brightness.
INT: Short press and rotate the knob to adjust the brightness.
CCT: Short press and rotate the knob to adjust the color
temperature.
G/M: Short press and rotate the knob to adjust the green/
magenta offset.
HSI mode:
In this mode you can adjustable brightness, hue and saturation.
INT: Short press and rotate the knob to adjust the brightness.
HUE: Short press and rotate the knob to adjust the hue.
SAT: Short press and rotate the knob to adjust saturation.
RGB mode:
In this mode you can adjustable brightness and red/green/blue
light ratio.
INT: Short press and rotate the knob to adjust the brightness.
R: Short press and rotate the knob to adjust the red light ratio.
G: Short press and rotate the knob to adjust the green light
ratio.
B: Short press and rotate the knob to adjust the blue light ratio.
GEL mode:
In this mode you have two types of color gel to chose from,
ROSCO and LEE, each of which has 30 build in color gel presets.
INT: Short press and rotate the knob to adjust the brightness.
CCT: Short press and rotate the knob to adjust the color
temperature.
No.: Short press and rotate the knob to select the color gel
preset.
12