Self-Cleaning - Bertazzoni Professional Series Installation, User And Maintenance Manual

ELECTRIC OVEN
4) Press MODE.
5) Press the "<" and ">" buttons to select the desired
cooking temperature and press MODE.
6) Insert the items to be cooked on the oven then connect
the probe jack to the port located in the upper left side of
the oven cavity.
7) The display will show current meat probe temperature as
well as set meat probe temperature.
8) When the temperature selected will be reached a tone
will be heard and the oven automatically switches off.
NOTE
To change settled time restart from point 1.
This function does not stop the cooking
process.
NOTE
Once a time function is settle the other time
functions are not available.
According to the recipe the oven can be
pre-heated before use any time functions.

SELF-CLEANING

WARNING
Children should not be left alone or
unattended in an area where appliances
are in use.
• During the Self-Clean cycle, exterior
surfaces may become hotter than usual.
Parts of the appliance may become
potentially harmful to children, and to
persons who lack adult knowledge of
appliances and lack adult reactions to
potentially harmful conditions.
Keep these individuals away during self-
clean and while the appliance is in use.
• The elimination of soil during self-
cleaning may facilitate the emission of
small amounts of chemicals or other
substances that may be harmful upon
sufficient
exposure to these substances, provide
good ventilation with an open window, or
use a ventilation fan or hood.
• Keep pet birds out of the kitchen or other
rooms where kitchen fumes could reach
them. During self clean, fumes are
released that may be harmful to birds.
44
exposure. To minimize
ELECTRIC OVEN
When set to the CLEAN mode, the oven reaches a high
temperature of approximately 840℉/450℃ that burns off all
food residues from the inside of the oven.
When the oven is set for CLEAN, the cooktop burners may
be used. It is common to see smoke and/or flames during
the clean cycle, depending on the content and amount of
greasy residues in the oven. If the flame persists, turn off
the oven and allow it to cool before opening the door and
wipe off the excessive residues.
At the end of the CLEAN cycle, some grey ash or burned
residue may remain inside the oven. This is a mineral
deposit that does not burn or melt. The amount of ash
depends on how heavily soiled the oven was before it was
cleaned. It is easily removed, when the oven is cold, using
a damp paper towel, sponge, or cloth.
Wipe off any smoke residue that remains on the front frame
with a cleaning product suitable for oven cavity cleaning. If
stains remain, use a mild liquid cleaner. The amount of
smoke stain is directly related to the amount of food
residues in the oven cavity before the start of the self-
cleaning cycle.
BEFORE SELF CLEANING THE OVEN
Wipe out large spillages, grease and any loose soil that can
be easily removed. Remove any soil that is outside the
door seal area. This appliance is designed to clean the
oven interior and the portion of the door that faces the oven
cavity. The outer edges of the door and the oven cavity are
not in the cleaning zone. Wipe this area clean before
starting the self-cleaning cycle.
Remove all utensils and racks.
Make sure the light bulbs and glass covers are in place.
Turn on the ventilator hood above the range and leave it on
until the self-clean cycle is completed (red indicator light
turning off).
Remove racks
1) Locate the two hooks at the bottom of the rack and
gently pull down contemporary the two hooks.
2) Pull the rack away from the oven side and remove
pulling up the upper hooks of the racks from the side of
the oven.
3) Remove the rack from the oven. Insert the probe closing
cap into the port located in the upper left side of the oven
cavity.
DOOR LOCK
When the CLEAN cycle starts, the automatic door lock
cycle begins. Check the door to confirm that it is locked.
You can stop the self-cleaning cycle by turning the function
selector to the OFF position.