Step 4: Minimum Flame Adjustment - Bertazzoni Professional Series Installation, User And Maintenance Manual

GAS CONVERSION

STEP 4: MINIMUM FLAME ADJUSTMENT

WARNING
These adjustments should be made only
for use of the appliance with natural gas.
For use with liquid propane gas, the choke
screw must be fully turned in a clockwise
direction.
SURFACE BURNERS
Light one burner at a time and set the knob to the
MINIMUM position (small flame).
Remove the knob.
The range is equipped with a safety valve. Using a small-
size slotted screwdriver, locate the choke valve on the
valve body and turn the choke screw to the right or left until
the burner flame is adjusted to desired minimum.
Make sure that the flame does not go out when switching
quickly from the MAXIMUM to the MINIMUM position.
A
For the gas valve of dual burner the choke valve is located
on the valve body (Fig. 30 ), the A screw adjust the outer
ring, the B screw adjust the inner ring.
Fig. 29
B
Fig. 30
27