Orbit Mode; Waypoint - Hubsan MINI User Manual

Click "Mode Selection", then "Change Orbit" to set the current position or the center po-
sition of the mobile device. During Orbit mode you can adjust the speed and direction of
the Drone by moving the control stick left or right and adjust the radius of the Orbit by
moving the control stick forward or backward.
The Drone will fly along a flight route created on the screen or a previously stored route.
You can adjust the speed of the Drone during flight.
W A Y P O I N T P L A N N I N G a n d S T O r A G E
It is possible to preset the Waypoint parameters such as: the number of them, the altitude
of each of them and other parameters. The Drone will follow the preset parameters after
activating Waypoint mode. You can also control the speed of the Drone during flight or you
can pause it or resume Waypoint mode.
After accessing Waypoint mode, take off the Drone and click on the "Save Waypoint" button
on the App, the Drone will perform the learning of the positions. Once all Waypoints have
been stored, they will be loaded and executed. The Drone will fly based on the stored data.
If the Drone, when starting the Waypoint, is not in the starting position of the first Waypoint,
it will move to the first starting point before starting this function.

Orbit mode

Normal
Mode

Waypoint

Mode
Orbit
Mode
Follow me
Mode
Creative
Video
Waypoint Mode
Flight point
planning
Click on one of the buttons to
access the operations menu
Flight point
memory
26