Table of Contents
Advertisement
Power Up
Use the rocker switch on the right rear of the unit, above the power cord, to turn on power to the Vertex™ VC4.
1. Open the rack door.
2. Open the touch screen door.
3. Turn on the rack power switch.
4. Turn on the power switch to appropriate analyzers.
5. Close and latch touch screen door. After 15 seconds, the analyzer status LEDs sequence four times through
all colors.
After the initial color sequence, the Vertex™ VC4 LEDs show system status. The following chart matches status with
LED signals.
Beep Status,
•
Level 1 alarms, Constant audio alarm tone
•
Level 2 alarms, Beeping audio alarm tone
•
Critical instrument faults impact gas monitoring, Beeping audio alarm tone
NOTE
Before the Vertex™ VC4 System can begin monitoring, you must create a configuration profile.
TM
Vertex
VC4 System
36
User Manual
Advertisement
Table of Contents
