Power On - Honeywell Bendix/King KMD 850 Pilot's Manual Addendum

POWER ON

When the KMD 850 is initially turned on and the WX key is pressed to
select the WX Radar page the following screen will be displayed:
This indicates that the weather radar sensor has been energized, is in
standby mode, and is communicating properly with the KMD 850 MFD.
While in standby the radar is not transmitting. The radar icon on the icon
bar shows a color radar dish with no energy waves being radiated from
it.
NOTE: The On/Off control of the KMD 850 does not control primary
power to the radar. The only way to remove primary power from
the radar is to pull the radar circuit breaker.
5
Rev 2 Jan/2002 KMD 850 Wx Radar Addendum