Table of Contents
Advertisement
•
Do not disassemble or crush battery cells and
battery packs.
•
Do not put battery cells and battery packs near heat
or fire. Do not put in sunlight.
•
Have an approved technician repair the Product.
•
For Products with rechargeable batteries, use only
AC adapters approved by Fluke Networks for use
with the Product to supply power to the Product
and charge the battery.
W
Warning: Class 1 and Class 2 Laser Products
To prevent eye damage and personal injury:
•
Do not look directly into optical connectors. Some
optical equipment emits invisible radiation that can
cause permanent damage to your eyes.
•
Do not look into the laser. Do not point laser
directly at persons or animals or indirectly off
reflective surfaces.
•
When you inspect fiber endfaces, use only
magnification devices that have the correct filters.
•
Use the Product only as specified or hazardous laser
radiation exposure can occur.
To prevent damage to the Product or cables under test
and to prevent data loss, read all safety information given
in all documentation supplied with the Product.
Connectors, Keys, and LEDs
See Figure 1:
LCD display with touchscreen.
Singlemode OTDR port with interchangeable SC adapter and
protective cap. The LED in front of the port turns on when the
port emits an optical signal.
Multimode OTDR port with interchangeable SC adapter and
protective cap. The LED in front of the port turns on when the
port emits an optical signal.
Visual fault locator port and protective cap. The LED in front of
the port turns on when the port emits an optical signal.
Do not look directly into optical connectors. Some sources
emit invisible radiation that can cause permanent damage
to your eyes.
W
Caution
W
Warning
*
*
Advertisement
Table of Contents
