Stopping The Engine - Hayter 481S Owner's Handbook Manual

STARTING THE ENGINE/STOPPING THE ENGINE
1.17
TO START THE ENGINE
Operate the engine start - grip: Stand behind the mower and
maintain a firm hold on the handlebar and the engine stop
lever to prevent the mower moving towards you. Use your
right hand to hold the engine start - grip and pull slowly until
resistance is felt, then pull rapidly to crank the engine. When
the engine starts carefully return the engine start - grip to the
storage position. If the engine does not start after 5 attempts
- refer to "Fault Finding".
Allow the engine to warm up and return the throttle lever to
the 'fast' position after starting a cold engine.
IMPORTANT - PREVENT ENGINE DAMAGE: Never
pull the engine start - grip when the engine is running.

STOPPING THE ENGINE

Stopping the engine: Reduce the throttle setting and disen-
gage the engine stop lever by releasing the lever.
Emergency stop: If the engine stop lever fails, move the
throttle lever to the 'slow' position and disconnect the spark
plug lead to stop the engine.
1.17
CS033
STOP
CS023
1
2
STOP
3
CS034
1. Engine
2. Spark Plug Lead
3. Spark plug
481141EB030299A