2. installation
Installing the Yomper mounting bracket
The installation must be carried out by your medical
equipment dealer.
Example of mounting bracket for rigid wheelchair frame
Example of mounting bracket for foldable wheelchair frame
•
For the installation of the various mounting
brackets, refer to the assembly guides supplied with each
Installing the EasyGo control box
• On the leg
Check the direction of the strap. Clip and turn the strap so
that the housing mounting bracket is correctly positioned
Do not tighten the strap too tight, so as not to
hinder your blood circulation, a finger must be
able to pass between the strap and your leg.
Position the control box, snap in and turn.
• On the wheelchair frame
Position the opening up.
Use the plastic clamps provided as well as the
rubber «blocker»
7
Need help?
Do you have a question about the YOMPER+ and is the answer not in the manual?