Table of Contents
Advertisement
Failure
The mounting bracket comes off the chair or makes a noise
When crossing 2 wheels, the Yomper wheel passes in front of the
wheelchair wheels and prevents you from returning to a seated
position.
The bottom of the Yomper rubs when crossing
Check the correct tightening of the components.
Contact your dealer.
The Yomper stopper is not installed correctly.
Contact your dealer immediately.
The mounting bar is too low. Contact your dealer to raise the
Yomper mounting bar so that It Is located between 19 and 21cm.
above the floor/ground.
23
Solution
Advertisement
Table of Contents
