Table of Contents
Advertisement
The menus :
Scan : pairing of the EasyGo box with a Yomper drive unit.
Inside speed : choice of 5 internal speeds, within the limit of
the ceiling set by a healthcare professional.
Outside speed : choice of 5 outside speeds, within the limit
of the ceiling set by a healthcare professional.
Acceleration : choice of the acceleration level (1 to 5, 5 being
the strong-est acceleration.
Resistance : choice of resistance force to stop the wheelchair
in indoor mode (1 to 5, 5 being the strongest resistance).
Side button : choice of left or right direction for placement
on the wheelchair (reverses the « » and « » buttons and the
display direction of the LED strip.
Default display : choice of the default display.
Data : displays the data stored in the Yomper (total number
of kilometers traveled, indoor / outdoor use time, number of
uses, number of Amp hours consumed by the battery since
purchase).
Operation :
Press « » or « » to change menu
Enter the menu via the main button.
o
Select the Function to modify, modify the value
with «
» or «
», confirm your choice with the main
button.
Restart the control box to take into account the value
changes.
Example : Changing speed 2, in indoor mode
Turn on the control box.
Press « » for more than 5s to enter the general menu.
Press « » to select the menu « Inside speed ».
Press the main button to validate your choice.
Press « » to display : « Inside Speed, 2=XX »
Press the main button to enter the speed modification
Press « » or « » to change the value
Press the main button to confirm and save your choice
Press the main button for 2s => restart the control box
SCAN : Pairing
When using an EasyGo box for the first time, you must pair
it with the Yomper.
Take the Yomper certificate of conformity.
Turn on the Yomper
Turn on the EasyGo control box
In the menu, select SCAN, validate with the main button
Then press the main button again to start the scan
The Yomper's Mac address
check that it corresponds with that of your Yomper with
your certificate of conformity (use the «
correct Mac address) and validate with the main button.
Restart the control box
16
appears on the screen,
» to select the
Advertisement
Table of Contents
