Acekare YOMPER+ User Manual page 12

The actual speed at which the Yomper propels you depends
on :
• The selected speed (from 1 to 5),
• From current mode (indoor, green LED strip, outdoor, red
LED strip),
• The settings programmed for the Yomper
INDOOR
In indoor mode, you can also use the pushrims to brake
when wishing to stop the Yomper motor.
OUTDOOR
In outdoor mode, the Yomper motor will only stop
by pressing the main button.
To change mode (indoor, outdoor), press the main button
for more than 2 seconds: the LED strip changes color
You were in indoor mode (GREEN), you switch to outdoor
mode (RED)
You were in outdoor mode (RED), you switch to indoor mode
(GREEN)
Your actual speed will automatically revert to level 1 (the
lowest)
After use turn off the control box using the ON / OFF button.
The Yomper goes into standby mode, its Power button
flashes quickly.
leave the Yomper in standby mode. However, it is
recommended to physically turn it off every evening.
It is advisable to switch off your control box as soon
as you are no longer using the Yomper. The system is
then safe, and cannot inadvertently start.
11
Yo u
c a n