Table of Contents
Advertisement
5. Maintenance
Audits and review period
Regularly check the tightness of the various mechanical
parts of the mounting bracket.
Check the condition of your tires twice a year.
Regularly ensure inflation to 2 bars.
Once a year, have your dealer check the correct performance
of the various mechanical elements, the drive nuts must be
tightened at 25 Nm.
Cleaning
The Yomper is cleaned with a damp cloth.
If water gets into the drive unit or control unit, it can destroy
them.
Never clean these components under running water or with
a high-pressure cleaner.
Never clean these components with running water Make
sure that liquids and moisture never get into the components
or with a high-pressure cleaner!
Cleaning therefore requires special care. Observe the
following instructions in particular :
• All cleaning should only be done with a cloth very lightly
moistened with water
• Do not use any abrasive or aggressive cleaning product for
cleaning.
• Never clean under running water with, for example a
garden hose or a high-pressure cleaner.
Water could enter the electronic system and cause
irreversible damage. The Acekare company declines all
responsibility for damage or consequential damage due to
water.
Such cases exclude any recourse to the guarantee.
WARNING : Do not use detergents or flammable or
corrosive products.
Transport
For transport, the Yomper and the EasyGo box must be
re-moved from the wheelchair and stored in a safe place
(prefera-bly used the transport case and the case of the
control box). Whether fitted to the wheelchair or kept
separately - in both cases the Yomper and the EasyGo
controller box must be switched off.
Materials and protection
All of the materials used are corrosion resistant and resistant
to disinfectants: aluminum frames; zinc-plated steel and
stainless-steel screws; plastics.
17
Advertisement
Table of Contents
