Controls And Modes - Acekare YOMPER+ User Manual

The LED of the EasyGo box flashes. The Power button on
the Yomper no longer flashes, meaning you are ready to use
the Yomper.
Controls ands modes
Start : Press the main button on the control box twice, the
Yomper will instantly start at speed 1 (the LED will no longer
flash).
Stop : Press the main button once, the Yomper motor stops.
The LED flashes green.
the user must brake the wheelchair. The Yomper
drive wheel does
motor stops, it
You can change the speed while driving or while at a
standstill.
Accelerate : Press the arrow furthest from you to increase
speed.
Slow down : Tap the arrow closest to you to decrease speed.
The LEDs show you the speed level (5 Maximum).
Starting at speed 2 or 3 is also possible to facilitate hill
starting of the Yomper.
(later versions than Yomper + 2.7.0).
10
not have a brake. When
goes into freewheel
the
mode.