Write Weight Filter Parameters; Read Weight Filter Parameters - Excell Wireless Platform Service Manual

EXCELL PRECISION CO., LTD.
After the above 'Read' command set is successfully written to the UUID E812 handle, there will be
return values (Hex data) after reading the UUID E812 handle, such as the following:
99 03 11 TT TT (for descriptions regarding the TT return value(s), please refer to 12-1-32. Write Scale's
Power-off Delay (Minutes) after Disconnection).
If the 'Write' operation has failed, reading UUID E812 handle will instead return 99 02 7F .... (please
refer to 12-1-39 Return Read & Write Status )
Execution conditions for these
commands

12-1-34. Write Weight Filter Parameters

This command is supported only in ADP18 or its later versions, plus AFP15 or its later versions.
Write UUID E812 handle (Hex) with the following command(s):
Calibration
Length Sub-Command
Command
(Hex) (Hex)
(Hex)
99 02 52
Read UUID E812 handle, which will return 99 02 7F .... (please refer to 12-1-39 Return Read & Write
Status).
Execution conditions for these
commands

12-1-35. Read Weight Filter Parameters

This command is supported only in ADP18 or its later versions, plus AFP15 or its later versions.
Write UUID E812 handle (Hex) with the following command(s):
Calibration Command (Hex)
99
After the above 'Read' command set is successfully written to the UUID E812 handle, there will be
return values (Hex data) after reading the UUID E812 handle, such as the following:
99 02 12 ZZ (for descriptions regarding the ZZ return value(s), please refer to 12-1-34. Write Weight
Filter Parameters)
If the 'Write' operation has failed, reading UUID E812 handle will instead return 99 02 7F .... (please
refer to 12-1-39 Return Read & Write Status).
Execution conditions for these
commands
TM
Calibration Mode
Executable
Type A
Data 2
'Write' Description
bytes
(Hex)
ZZ: 0-9 (default:4)
ZZ 0: Filter is heavy.
9: Filter is light.
Calibration Mode
Executable
Length (Hex)
01
Calibration Mode
Executable
54
Normal Mode
Executable
Normal Mode
Executable
Sub-Command (Hex)
12
Normal Mode
Executable
ZSME000000026