Table of Contents
Advertisement
The satellite icon at the top of the screen is the quickest way to determine if the unit has a valid satellite lock. When
lock is acquired, it will display as solid green. When there is no satellite lock, the icon will flash red.
GPS Information
Cold Start
Press this button to perform a cold start on the VBOX Touch. This means the receiver will clear any data currently
stored within its internal memory. It may be required to do this when the GPS engine has locked up or
the VBOX Touch is struggling to acquire a satellite lock.
When the button has been pressed, the unit will make an audible sound and a 'PLEASE WAIT' message will be
displayed on the screen which will count down from 3. The number of satellites will then be displayed as '00' and
GPS status will show 'SEARCHING FOR SATELLITES' until the satellite lock has been acquired. It will take
approximately 25 to 30 seconds for the unit to reacquire the satellite lock.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_RTK/
User_Guide_%E2%80%93_VBOX_Touch_RTK/06_Settings_VBOX_Touch_RTK
9
Advertisement
Table of Contents
