Table of contents SECTION 1: Using these instructions Before you start The HydroTap Clean process ................2 SECTION 1: Using these instructions ..............3 This document details: SECTION 2: IMPORTANT SAFETY INSTRUCTIONS ..........4 The HydroTap system commissioning process using the SECTION 3: Technical data & parts supplied ............5 HydroTap Clean can.
SECTION 2: IMPORTANT SAFETY INSTRUCTIONS SECTION 3: Technical data & parts supplied Parts supplied with the HydroTap Clean kit HydroTap Clean can adapter (1) (used in filter head) HydroTap Clean can (2) HydroTap Clean instructions Compressed gas warning Parts identification •...
• Initial commissioning screen touch COMMISSIONING 12:12 PM contamination of the cartridge. Language option. • Moisten the o-rings with water. HydroTap G5 Language • Open the filter door on the Command Centre. 024-H5v0.1.16 • Push the new cartridge up into the filter head. BCS100...
SECTION 4: Commissioning SECTION 4: Commissioning 4.5 Filter flush 4.5.1 Limescale filter flush (If optional limescale filter is installed) • Follow the steps on-screen. • Follow the steps on-screen to flush the filter. • (Selecting NO advances the screen to the next process). •...
SECTION 4: Commissioning SECTION 4: Commissioning 4.6 System priming (BCS, BC, BA, CS, C models) BCS CS SYSTEM PRIMING 12:12 PM • Read the on screen information. Hot Tank Ambient • For sparkling models disconnect the CO2 Reticulation SYSTEM PRIMING 12:12 PM The system reticulation will be primed bottle or turn off the CO2 regulator (see...
SECTION 4: Commissioning SECTION 4: Commissioning 4.8 Boiling calibration and cleaning BC,C • Cleaning process begins. BCS, BC, BA • Monitor the on screen information. CHILLED CLEANING 12:12 PM • Read the on screen information. • Note This is automatic unless ‘Font’ Cleaning in BOILING CALIBRATION &...
Page 9
SECTION 4: Commissioning SECTION 4: Commissioning • Read the on screen information and BCS, BC, BA BCS, BC, BA instructions. RE-INSTALL FILTER 12:12 PM RE-INSTALL FILTER 12:12 PM • Note When the cleaning process While Boiling Calibration in Progress..While Boiling Calibration in Progress..Step 1.
SECTION 4: Commissioning SECTION 4: Commissioning 4.9 Tank flush • Monitor the on screen information. • For BCS models: • Read the on screen information and TANK FLUSH 12:12 PM TANK FLUSH 12:12 PM Fresh water will be flushed through the instructions.
SECTION 4: Commissioning SECTION 4: Commissioning 4.10 Select the booster • Monitor the on screen information. TANK FLUSH 12:12 PM • Read the on screen instructions. EXTERNAL BOOSTER 12:12 PM • For CS models the sparkling tank will Sparkling Tank Cycle 1/1 •...
Call US Toll Free 1-833-233-2358 for assistance, service, spare parts or enquiries. As Zip policy is one of continuous product improvement, changes to specifications may be made without prior notice. Images in this booklet have been modified and may not be true representations of the finished goods.