Product Description - Pytes HV48100 User Manual

Avoid foreign objects (such as conductive objects, screws, and liquids) from entering a
battery, as this may cause short circuits.
Leakage Handling
Electrolyte is corrosive and can cause irritation and chemical burns. If you come into direct
contact with the battery electrolyte, do as follows:
Inhalation: Evacuate from contaminated areas, get fresh air immediately, and seek imme-
diate medical attention.
Eye contact: Immediately wash your eyes with water for at least 15 minutes, do not rub
your eyes, and seek immediate medical attention.
Skin contact: Wash the affected areas immediately with soap and water and seek immedi-
ate medical attention.
Intake: Seek immediate medical attention.
Recycling
Dispose of waste batteries in accordance with local laws and regulations. Do not dispose of
batteries as household waste. Improper disposal of batteries may result in environmental
pollution or an explosion.
If a battery leaks or is damaged, contact technical support or a battery recycling company for
disposal.
If batteries are out of service life, contact a battery recycling company for disposal.
Do not expose waste batteries to high temperatures or direct sunlight.
Do not place waste batteries in environments with high humidity or corrosive substances.
Do not use faulty batteries. Contact a battery recycling company to scrap them as soon as
possible to avoid environmental pollution.
Precaution
Please read this manual carefully before installation and any operation.
Charge the battery every 6 months to keep battery SOC > 90% if long term storage.
Battery must be charged within 12 hours when low voltage alarm triggered.
Each Battery module has an output voltage of over 48V. It is vital to pay attention to personal
safety in any case when operating.
All battery terminals must be disconnected before maintenance.
Please contact with Pytes or its dealer within 24 hours if there is anything abnormal.
Battery being damaged directly or indirectly by above cases will result in warranty failure.

2 Product Description

HV48100 is a high voltage battery storage system based on lithium iron phosphate battery,
which is one of the new energy storage products developed and produced by Pytes. By
working with PCS (Power Conversion System), DC Chargers, Inverters and UPS etc.,
HV48100 can be applied in various scenarios including Micro-grid, Solar Energy Storage
system, off-grid etc. It meets energy storage system demands for its long circle life, compact
design, light weight, easy installation and wide compatibility with PCS.
HV48100 is equipped with built-in battery management system (BMS) to manage and monitor
14