Table of Contents
Advertisement
304 MBUX multimedia system
Measuring braking
Z
Drag Race options
#
Select Braking.
#
Set a starting speed or select Automatic.
#
Start off and begin the measurement.
#
Brake to a stop.
#
Measurement is incremental, in steps of
6 mph (10 km/h) to a stop. If the braking pro-
cedure is started at a speed of 98 mph
(157 km/h), forexample, measurement will
start as soon as 93 mph (150 km/h ) has
been reached.
Storing and calling up measured values
If measurement is completed or canceled, a
prompt will appear asking whether the measure-
ment should be saved.
Confirm the prompt with
OK
to save.
#
Calling up saved measurements
Select ± History.
#
Select Acceleration,
Quarter Mile
#
Select a measurement.
#
The desired measurement will be displayed in
detail.
or
Delete a measurement.
#
Calling up the telemetry display
Multimedia system:
TRACK PACE
4
The telemetry display shows current vehicle data
as a digital value and as a diagram. Up to four
parameters can be selected to be shown on the
display.
For example:
Engine speed
R
Wheel angle
R
Speed
R
Steering angle
R
Set the desired parameters.
#
or Braking.
#
Configuring AMG TRACK PACE
Requirements
To connect a mobile device to the TRACK PACE
app:
R
Telemetry
5
R
Multimedia system:
4
Connecting a mobile device via the TRACK PACE
app
The TRACK PACE app makes it possible to record
videos and to synchronize them with stored
tracks.
#
#
Set the time.
The set parameters will be evaluated in the
diagram for the selected time.
the TRACK PACE app is installed on the mobile
end device.
the mobile end device is connected to the
multimedia system via Wi-Fi.
TRACK PACE
Z
5
Select
TRACK PACE
App.
Select
Authorize a New
Device.
Advertisement
Table of Contents
