Table of Contents
Advertisement
308 MBUX multimedia system
Overview of the toll system
%
The toll system is optional equipment and is
not available in all vehicles.
Debiting of toll charges at freeway toll gates is
facilitated with an electronic payment system.
The toll system uses RFID (Radio Frequency Iden-
tification) for data transfer between the control
unit and the toll station.
The toll system is initially switched off at the fac-
tory.
The control unit is in the vehicle glove box.
In order to be able to use the toll system, it must
have been registered by the customer and activa-
ted by the service provider:
Activate the toll system in the settings of the
R
MBUX multimedia system or on the control
unit.
There are two ways to register and activate:
R
In the Mercedes me App, register the unit
-
identification number of the control unit
and activate the toll system.
Alternatively, you can register and activate
-
via the
Toll Service
app.
Activation of the toll system can take up to
48 hours after registration.
When the toll system is activated, the automatic
detection of the number of vehicle occupants is
initially switched off at the factory. The number of
vehicle occupants is preset with one person.
The following applies for roads on which toll
charges are dependent on the number of vehicle
occupants:
If the automatic detection of the number of
R
vehicle occupants is switched off, the number
of vehicle occupants must be selected man-
ually. This ensures correct toll accounting.
The number of vehicle occupants can be
R
transmitted automatically. In the process, the
number of seat belts worn is determined.
If the number of detected persons does not
correspond with the number of persons
actually in the vehicle, the number of persons
must be manually selected.
The standard setting of one person does not need
to be changed for roads which require toll pay-
ment regardless of the number of vehicle occu-
pants.
The toll system enables the payment of toll
charges in many states of the USA.
%
In Mexico, for example, the toll system can be
registered and activated for journeys to the
USA.
Notices
You can only use the toll system once registra-
R
tion and activation are complete.
Drive at the prescribed vehicle speed in the
R
toll lane.
Mercedes-Benz recommends operation using
R
the MBUX multimedia system. Alternatively,
this can also be done on the control unit in
the glove box.
For safety reasons, entries should be made
R
while the vehicle stationary.
For further information, please consult the
R
Mercedes me App or an authorized Mercedes-
Benz Center.
Advertisement
Table of Contents
