Table of Contents
Advertisement
166 Climate control
▌Activating/deactivating pre-entry climate con-
trol for departure time
Requirements
The high-voltage battery is charged suffi-
R
ciently.
The function has been activated via the multi-
R
media system.
To activate: set the departure time
#
(
page 165).
/
Pre-entry climate control for departure time
will switch on a maximum of 55 minutes
before the selected departure time. It will
remain active for another five minutes if depar-
ture is delayed.
To deactivate the pre-entry climate control at
#
departure time early: press & on the cli-
mate bar on the central display (see Opera-
tor's Manual for the vehicle) or switch off the
preselection of the time in the air conditioning
menu.
If present, the following functions will remain
active once the vehicle has been started:
Seat heating
R
Seat ventilation
R
Panel heating
R
Depending on the vehicle's equipment, the follow-
ing functions will also be adjusted during pre-
entry climate control if they have already been
switched on during regular vehicle operation:
Fragrancing
R
Ionization
R
Air vents
▌Adjusting the front air vents
& WARNING Risk of burns or frostbite due to
being too close to the air vents
Very hot or very cold air can flow from the air
vents.
Make sure that all vehicle occupants
#
always maintain a sufficient distance
from the air vents.
If necessary, direct the airflow to another
#
area of the vehicle interior.
To guarantee the flow of fresh air through the air
vents into the vehicle interior, note the following:
Always keep the vents and ventilation grilles in
R
the vehicle interior clear.
Keep the air inlet free of residue build-up
R
(
page 342).
/
To set the airflow direction of the side air
#
vents: hold controller
1
and move it up or
down or to the left or right.
To set the airflow direction of the center air
#
vents: hold controller
1
and move it up or
down or to the left or right.
Advertisement
Table of Contents
