Enerzone EB00025 Installation And Operation Manual page 50

You can also install, on your appliance, a thermodisc #AC05530 (basic model included with the
blower), to enable the blower to start or stop automatically when the stove is hot or too cold. It is
possible to install the quick connect thermodisc instead #AC02055, sold separately.
Characteristics of the thermodisc:
•
Starts the blower when the stove's temperature reaches 43 °C (110 °F)
•
Cuts the electrical contact when the temperature falls to 32 °C (90 °F).
When using the blower without the thermodisc, allow the stove to reach operating temperature
(approximately one hour), before turning it on. The increased airflow from the blower cools the
firebox and could affect the start-up combustion efficiency if the blower is turned on too early.
CAUTION: ENSURE THAT THE BLOWER'S AND/OR THE THERMODISC'S POWER CORD
ARE NOT IN CONTACT WITH ANY SURFACE OF THE STOVE TO PREVENT ELECTRICAL
SHOCK OR FIRE DAMAGE. DO NOT RUN THE POWER CORD BENEATH THE STOVE.
50
Destination 1.6 Installation and Operation Manual