Table of Contents
Advertisement
The glass gaskets (A) and (B) must be centred on the top and bottom edges of the glass. To do
this easily, peel back a section of the paper covering the adhesive and place the gasket on a table
with the adhesive side up. Stick the end of the gasket to the edge of the glass, then press the edge
of the glass down onto the gasket, taking care that it is perfectly centred on the gasket. Peel off
more of the backing and press the next section onto the gasket. Do not stretch the gasket as you
place it. Now pinch the gasket to the glass in a U shape. Cut exceeding gasket, if any. Do the
same for the other side.
28
Destination 1.6 Installation and Operation Manual
Advertisement
Table of Contents
