Front Panel Messages - Tektronix Phaser 850 User Manual

Front panel messages

Power indicator is blinking
Possible Causes
The printer is receiving, processing or printing
a job.
You have entered the menu in the front panel.
Warm-up sequence has not finished.
Power indicator is off
Possible Causes
The printer is turned off, is not ready, is
disabled, or has detected an error.
Error indicator is blinking
Possible Causes
The printer is stopped because it detected an
error or condition requiring user intervention,
such as an open door or a media jam.
Returns to Ready to Print without any intervention
Possible Causes
Front-panel timeout: If no activity occurs in
2 minutes, the front panel returns to
Ready to Print.
Advanced Features and Troubleshooting Manual
Troubleshooting Phaser 850 Printers
Solution
Wait for the job to be completed or cancel
the job.
Exit the menu.
Wait until the printer displays Ready to Print.
Solution
Make sure that the printer is plugged in and
I
turned on.
Do not plug the printer's power cord into a
I
power strip; use a wall outlet.
Solution
Correct the condition reported by the front
I
panel (for example, close the door or clear the
media jam).
Press the Help button to access information on
I
the error condition.
Turn the printer off and unplug the power
I
cord for 1 minute. Then plug in the power
cord and turn on the printer.
If the problem is an error that is not
I
user-correctable, contact Customer Support.
Solution
Scroll to Menu and press Select to re-enter
the menu.
109