Problems With Automatic Two-Sided Printing - Tektronix Phaser 850 User Manual

Problems with automatic two-sided printing

Output is single-sided
I Make sure that you have selected two-sided printing in the printer driver.
I Use Letter- or A4-size paper only.
I Make sure the switch on the standard Paper/Transparency tray is set to Paper.
Frequent jams with two-sided printing
I Paper must be between 60 - 150 g/m
performance, use papers within the 16 - 32 lb. range.
I When using the manual feed slot, make sure that the media is always loaded straight.
Second side of a two-sided print is upside-down
I Select the correct method for binding preference in the printer driver.
Long-edge binding: Page turns on the long side, regardless of image orientation.
I
Short-edge binding: Page turns on the short side, regardless of image
I
orientation.
I Refer to the printer's user guide for detailed instructions.
Letterhead paper prints on the wrong side or prints upside-down
I
Manual feed: Load letterhead paper face up with the top of the page entering the
printer first.
I Tray: Load letterhead paper face down with the top of the page at the front end
of the tray.
Advanced Features and Troubleshooting Manual
Troubleshooting Phaser 850 Printers
2
(16 - 40 lb. bond) in weight. For better
113