Tektronix Phaser 850 User Manual page 58

4.
If the test print looks like example B in the illustration, go on to
Step 5.
5.
Scroll to Eliminate Light Stripes; press Select.
6.
Check the test print that prints automatically, to confirm that the
problem is corrected.
7.
Repeat Step 5 as necessary. If light stripes persist after three
consecutive clean cycles, turn off the printer for 4 hours to allow
the ink to cool and solidify. Then turn on the printer and repeat
the clean cycles, if necessary.
For more details, refer to the troubleshooting information on the
printer's CD-ROM or on the Tektronix web site.
58
Phaser 850 Color Printer