Tektronix Phaser 850 User Manual page 111

Incorrect Media Size
Possible Causes
An incorrect paper size is loaded in the tray, or
paper narrower than the driver selection is in
the manual feed slot.
Ink low - Add ink
Possible Causes
One or more colors of ink are almost empty.
Out of ink
Possible Causes
One or more colors of ink are empty.
Ink sticks jammed
Possible Causes
One or more ink sticks are stuck in the
ink-loading bin.
Maintenance Kit Low
Possible Causes
The Maintenance Kit is almost empty.
Maintenance Kit Empty
Possible Causes
The Maintenance Kit is depleted.
Advanced Features and Troubleshooting Manual
Troubleshooting Phaser 850 Printers
Solution
Use only supported paper, transparency, and
I
envelope sizes.
Make sure the size matches the driver
I
selection.
Solution
Add ink soon.
Solution
Add ink to continue printing.
Solution
Open and close the top cover.
I
Press each row of ink sticks in the ink-loading
I
bin to make sure they are not jammed.
Do not use broken ink sticks.
I
Install ink sticks with the tapered side down.
I
Solution
Order a replacement Maintenance Kit.
Solution
Replace the Maintenance Kit to continue
I
printing.
If message remains after new kit is installed,
I
make sure the new counter is also installed.
111