4.
Handle the Rapid Release Guide carefully to avoid bending or damaging the clear
plastic edge. Lift up on the blue tabs and remove the Rapid Release Guide. Do not
use any sharp objects in this area of the printer.
5.
Gently wipe the clear plastic Rapid Release Guide with a pre-soaked alcohol cloth.
6.
If the Rapid Release Guide is damaged, replace it.
7.
Reinstall the Rapid Release Guide, pressing down on the blue tabs to snap the guide
into place.
8.
Close the exit cover.
Advanced Features and Troubleshooting Manual
Cleaning Phaser 850 Printers
0643-168
0643-154
0643-169
135