Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Teltonika 150FMC
Summary of Contents for Teltonika 150FMC
- Page 1 FMC150 Advanced tracker with CAN data reading feature Quick Manual v1.7...
-
Page 2: Table Of Contents
CONTENT Know your device ........................................3 Pinout ...........................................4 FMC150-QJIB0 Wiring scheme ...................................5 FMC150-QKIB0 Wiring scheme..................................6 Set up your device ......................................7 PC Connection (Windows) ....................................8 How to install USB drivers (Windows) ................................8 Configuration (Windows) ....................................9 Quick SMS configuration ....................................11 Mounting recommendations..................................13 Basic characteristics ...................................... -
Page 3: Know Your Device
KNOW YOUR DEVICE TOP VIEW BOTTOM VIEW (WITHOUT COVER) TOP VIEW (WITHOUT COVER) NAVIGATE MICRO SOCKET STATUS MICRO SIM BATTERY SLOT SOCKET Quick Manual v1.7 // FMC150... -
Page 4: Pinout
PINOUT PIN NUMBER PIN NAME DESCRIPTION PIN NUMBER PIN NAME DESCRIPTION VCC (10-30) V DC (+) Power supply (+10-30 V DC) VCC (10-30) V DC (+) Power supply (+10-30 V DC) Digital input, channel 3 / Analog Digital input, channel 2 / DIN 3 / AIN 2 input, channel 2, Input range: DIN2/ AIN1... -
Page 5: Fmc150-Qjib0 Wiring Scheme
FMC150-QJIB0 WIRING SCHEME FMC150-QJB0 WIRING SCHEME IGNITION CAN BUS DETECTION ALARM BUTTON DIN2 MULTIPLE AIN2 CAN1L CAN1H TEMPERATURE SENSORS IBUTTON RELAY CAN2L CAN2H DIN1 1WIRE DATA DIN2-N/AIN1 DOUT2 DIN3/AIN2 DOUT1 FUEL GAUGE +10...30 V DC BUZZER LED LIGHTS ANALOG POWER SUPPLY LLS SENSOR 10 - 30V DC STARTER... -
Page 6: Fmc150-Qkib0 Wiring Scheme
FMC150-QKIB0 WIRING SCHEME FMC150-QKIB0 WIRING SCHEME IGNITION CAN BUS DETECTION ALARM BUTTON MULTIPLE AIN1 CAN1L CAN1H TEMPERATURE SENSORS IBUTTON RELAY CAN2L CAN2H 1WIRE DATA DIN1 DOUT3 DOUT2 DIN2/AIN1 DOUT1 FUEL GAUGE +10...30 V DC BUZZER LED LIGHTS ANALOG POWER SUPPLY POWER SUPPLY STARTER LLS SENSOR... -
Page 7: Set Up Your Device
Wiki in place where it does not attach device cover back. from both sides. how to enter it later in obstruct other components. Teltonika Configurator Make sure that Micro- SIM card cut-off corner is pointing forward to slot. -
Page 8: Pc Connection (Windows)
. Choose your device named – “FMC150_last_7_imei_digits”, without LE in the end. Enter default ® password 5555, press Connect and then select Done. You are now ready to use the device on your computer. wiki.teltonika-gps.com/view/FMC150_LED_status 1 Page 7, "How to install USB drivers" 2 ... -
Page 9: Configuration (Windows)
CONFIGURATION (WINDOWS) At first FMC150 device will have default factory settings set. These settings should be changed according to the users needs. Main configuration can be performed via Teltonika Configurator software. Get the latest Configurator version from here . Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. - Page 10 Data Acquisition – where data acquiring parameters can be configured. More details about FMC150 configuration using Configurator can be found in our Wiki wiki.teltonika-gps.com/view/FMC150_Status_info wiki.teltonika-gps.com/view/FMC150_Status_info#GNSS_Info wiki.teltonika-gps.com/view/FMC1501_Status_info#GSM_Info wiki.teltonika-gps.com/view/FMC150_Status_info#I.2FO_Info wiki.teltonika-gps.com/view/FMC150_Status_info#Maintenance wiki.teltonika-gps.com/index.php?title=FMC150_GPRS_settings After connection to Configurator Status window will be wiki.teltonika-gps.com/index.php?title=FMC150_Data_acquisition_...
-
Page 11: Quick Sms Configuration
QUICK SMS CONFIGURATION Default configuration has optimal parameters present to ensure best performance of track quality and data usage. Quickly set up your device by sending this SMS command to it: « setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0» Note: Before SMS text, two space symbols should be inserted. GPRS SETTINGS: 2001 –... - Page 12 After successful SMS configuration, FMC150 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator SMS parameters wiki.teltonika-gps.com/view/Teltonika_Configurator wiki.teltonika-gps.com/view/Template:FMC_Device_Family_Parameter_list Quick Manual v1.7 // FMC150...
-
Page 13: Mounting Recommendations
MOUNTING RECOMMENDATIONS CONNECTING WIRES • Wires should be fastened to the other wires or non-moving parts. Try to avoid heat emitting and moving objects near the wires. • The connections should not be seen very clearly. If factory isolation was removed while connecting wires, it should be applied again. -
Page 14: Basic Characteristics
LED INDICATIONS CAN STATUS LED INDICATIONS BEHAVIOUR MEANING NAVIGATION LED INDICATIONS Blinking fast Reading CAN data from vehicle constantly BEHAVIOUR MEANING Permanently Wrong program number or wrong switched on wire connection Permanently GNSS signal is not received switched on Wrong connection or CAN processor in sleep mode Blinking every second Normal mode, GNSS is working BASIC CHARACTERISTICS... - Page 15 Digital Input 2) FMC150-QKIB0: 1 (Digital Input 1) POWER FMC150-QJIB0: 2 Analog Inputs FMC150-QKIB0: 1 10-30 V DC with overvoltage Input voltage range protection wiki.teltonika-gps.com/view/FMC150_Sleep_modes#Ultra_Deep_Sleep_ 1 mode 170 mAh Li-Ion battery 3.7 V (0.63 Back-up battery wiki.teltonika-gps.com/view/FMC150_Sleep_modes#Deep_Sleep_mode 2 teltonika-gps.com/view/FMC150_Sleep_modes#Online_Deep_Sleep_ 3 ...
- Page 16 -40 °C to +85 °C Notification, Unplug detection, (without battery) Towing detection, Crash detection, Auto Geofence, Manual Geofence, Storage temperature -40 °C to +85 °C Trip (without battery) Operating temperature (with -20 °C to +40 °C battery) wiki.teltonika-gps.com/view/FMC150_Accelerometer_Features_settings 6 Quick Manual v1.7 // FMC150...
-
Page 17: Electrical Characteristics
ELECTRICAL Sleep, Online Deep Sleep, Deep Sleep modes Sleep, Ultra Deep Sleep CHARACTERISTICS FOTA Web FOTA Teltonika Configuration and Configurator (USB, Bluetooth ® firmware update wireless technology), FMBT mobile VALUE application (Configuration) CHARACTERISTIC DESCRIPTION MIN. TYP. MAX. UNIT Configuration, Events, DOUT control,... - Page 18 VALUE VALUE CHARACTERISTIC CHARACTERISTIC DESCRIPTION DESCRIPTION MIN. TYP. MAX. UNIT MIN. TYP. MAX. UNIT Input resistance (DIN3) kΩ Input voltage threshold Input voltage Sink current Supply (Recommended voltage Operating Conditions) CAN INTERFACE Input Voltage threshold Internal terminal (DIN1) resistors CAN bus (no Ω...
-
Page 19: Safety Information
SAFETY INFORMATION Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply. This message contains information on how to operate FMC150 All wireless data transferring devices produce safely. -
Page 20: Certification And Approvals
® trademarks owned by Bluetooth SIG, Inc. and any use of such marks by UAB Teltonika Telematics is under license. Other trademarks and trade names are those of their respective owners. CHECK ALL CERTIFICATES... -
Page 21: Warranty
Warranty does not apply to any consequential damages. • Warranty is not applicable for supplementary product equipment (i. e. PSU, power cables, antennas) unless the accessory is defective on arrival. • More information on what is RMA wiki.teltonika-gps.com/view/RMA_guidelines Quick Manual v1.7 // FMC150...
Need help?
Do you have a question about the 150FMC and is the answer not in the manual?
Questions and answers