Advertisement
Transmitter
Throttle/Yaw
5CH
5CH: When the dial switch is at the bottom, the aircraft is locked, dial up to TAKE OFF,
the aircraft is unlocked (can take off ), such as dialing the key，When the switch is in the
unlocked position to turn on the power of the remote control, the remote control beeps and
alarms, but there is no signal output. after the switch is reset, The remote control works fine.
6CH: When the key switch is at the bottom, it is the auto-stable mode. and when it is
dialed to the top, it is the altitude hold + auto-stable mode.
7CH: In the locked state of the aircraft, short press can adjust the color of the RGB
lights behind the aircraft; in the unlocked state, short press can turn on/off the headless mode.
8CH: in the locked state of the aircraft, short press can adjust the color of the RGB
lights in front of the aircraft; in the unlocked state, short press can turn on/off the height
limit mode.
Power charging indicator:
1. The remote control power display, red light means 10-30% power, yellow light means
30-60% power, green light means 60-100% power.
2. Power off and charge, the indicator light is solid red to indicate charging, and steady
green indicates that the charging is completed.
3. When the remote control is out of power, the red light will flashes and the buzzer
beeps(Di Di Di...).
5-dimensional fine-tuning buttons:
1. Not enabled by default
2. Press and hold the fine-tuning button to the right for 2 seconds with a long beep will
activate the fine-tuning of the right joystick.
3. Press and hold the fine-tuning button to the left for 2 seconds with a long beep will
activate the fine-tuning of the left joystick.
4. After 10 seconds, three beeps will be heard to complete the fine-tuning.
5. One beep when fine-tuning up and down ,then left and right, and a long beep
when fine-tuning is in the middle
Power LED
7CH LED
7CH
5-dimensional fine-tuning buttons
8CH LED
8CH
Pitch/Roll
6CH
Advertisement
