Memory Function; Adjustable Settings - ADC Adtemp 433 User Manual

Non-contact infrared body thermometer

Hide thumbs Also See for Adtemp 433:

Table of Contents

6. Memory Function

The unit retains the last 50 readings. The newest reading will occupy

memory cell 1, the oldest, memory cell 50.

To recall previous readings:

1. With the power off, press the up "▲" or down "▼" button to

view the history of measured values. The display will indicate whether

the reading was a body or surface temperature measurement.

2. An empty memory cell shows "---°C" or "---°F".

Note: Once 50 measurements are in memory each new measurement

will overwrite the oldest.

To delete readings from memory:

1. With the power on, press and hold the up "▲" or down "▼" button

multifunction key until the display shows "CLR." The device will sound a

long beep, which means that all stored temperature readings have been

cleared.

Note: All readings (body and surface) will be cleared when deleting

readings from memory.

The Adtemp 433 has three adjustable settings:

F1 Temperature Scale F/C

1. With the instrument on, press and hold the SET button until the display

reads F1.

Table of Contents

Do you have a question about the Adtemp 433 and is the answer not in the manual?