Printing Two-Sided (Duplex) Jobs - Xerox DocuPrint N4525 User Manual

6.
At the bottom of the dialog box, select Transparency.
7.
Click the OK button to save the properties.
8.
Send the job to the printer.
Guidelines for printing on transparencies:
Use Xerox transparencies; refer to page 8 for information.
I
Transparencies are not recommended for use with the
I
Finisher.

Printing two-sided (duplex) jobs

With the optional Duplex Module installed, you can print two-sided
(duplex) jobs.
Use only the paper sizes listed in the table on page 12. Do not use
envelopes, postcards, transparencies, or label paper for duplex jobs.
Use paper with a weight of 64-105 g/m
Refer to pages 14 through 25 for the proper orientation of drilled paper
and letterhead when printing duplex.
Caution
To avoid paper jams, never put paper in the duplex unit.
For the Windows 95/Windows 98 operating system:
1.
In your application, select File and then Print.
2.
Select the Xerox N4525 printer driver.
3.
Open the Properties dialog box.
4.
Select the Paper/Output tab.
5.
Select the type of Duplex:
Long edge binding
I
Short edge binding
I
You must have configured the printer (on the System
Configuration tab) to include the Duplex Module.
User Guide
2
(17-28 lbs.).
55