Xerox DocuPrint N4525 User Manual page 45

The Finisher cannot compile and staple mixed paper sizes within the
same job. If the job is only one page or the job exceeds 50 pages, it
is not stapled. If the staple cartridge is empty, the printer continues
printing (without stapling the sets) and the control panel displays
Install Staple
the printer diverts the output to the Face-down Bin, the sets are not
stapled.
For the Windows 95/Windows 98 operating system:
1.
In your application, select File and then Print.
2.
Select the Xerox N4525 printer driver.
3.
Open the Properties dialog box.
Note
If the Status tab appears black, you are running in Auto
Configure mode. If the Status tab appears gray, you must
configure the printer (on the System Configuration tab) to
include the Finisher.
4.
Select the Paper/Output tab.
5.
From the Destination drop-down list, select Finisher.
6.
Select the Document Options tab.
7.
Select a Staple Option:
No Staple
I
Position 1
I
Position 2
I
Dual
I
Refer to the diagrams on page 34 for the stapling locations,
depending on the orientation you choose.
8.
Click the OK button to save the properties.
9.
Send the job to the printer.
User Guide
Cartridge. If the Finisher output bin is full and
31