Using The Hole Puncher - Xerox DocuPrint N4525 User Manual

3.
Follow Steps 5 and 6 on page 38 to replace the staple cartridge in
the Finisher.

Using the hole puncher

The optional Finisher can be ordered with a 3-hole or 4-hole punching
feature. Each piece of paper is punched individually. You can select
stapling, hole punching, or both.
For the Windows 95/Windows 98 operating system:
1.
Be sure that the margins are large enough that the holes are not
punched in the text or graphics.
2.
In your application, select File and then Print.
3.
Select the Xerox N4525 printer driver.
4.
Open the Properties dialog box.
Note
If the Status tab appears black, you are running in Auto
Configure mode. If the Status tab appears gray, you must
configure the printer (on the System Configuration tab) to
include the Finisher.
5.
Select the Paper/Output tab.
6.
Select the Document Options tab.
7.
Select Hole Punch.
8.
Click the OK button to save the properties.
9.
Send the job to the printer.
For the Windows 2000 and Windows NT (PS/PCL5e) operating systems:
1.
In your application, select File and then Print.
2.
Select the Xerox N4525 printer driver.
3.
Open the Properties dialog box.
4.
Click the Advanced button.
40
DocuPrint N4525 Network Laser Printer