Printing Transparencies - Xerox DocuPrint N4525 User Manual

8.
Click the OK button to save the properties.
9.
Send the job to the printer.
Guidelines for printing on labels:
Use Xerox labels; refer to page 8 for information.
I
If any of the labels on a sheet are missing, do not use that
I
sheet; it may damage printer components.
Labels cannot be output to the Finisher.
I

Printing transparencies

You can print transparencies from the trays or the Multi-sheet Bypass
Feeder.
At the printer:
1.
Insert the transparencies into a tray or the Multi-sheet Bypass
Feeder (see page 26):
Rough side is up.
I
Smooth side is down.
I
The stripe enters the printer first.
I
Don't load transparencies above the indicated mark on the
I
back of the tray or side of the Multi-sheet Bypass Feeder.
2.
If you changed the type of media in a tray or the Multi-sheet
Bypass Feeder, use the control panel to select the media type and
size:
For Tray 1, 2, 3, or the Custom Paper Tray, see page 19
I
For the Multi-sheet Bypass Feeder, see page 27
I
(Trays 1, 2, 3, 4, and 5 have paper size sensors, so you don't need
to specify the paper size.)
User Guide
53