Transparencies; Guidelines; Printing Transparencies From Trays - Xerox Phaser 4500 Reference Manual

Laser printer
Hide thumbs Also See for Phaser 4500:
Table of Contents

Advertisement

Transparencies

This topic includes:
Xerox Clear Transparencies can be printed from any tray. They should be printed on one side
only. To order Xerox Clear Transparencies, contact your local reseller.

Guidelines

For more information on paper types, weights, and sizes, go to
Papers

Printing Transparencies from Trays 1-4

1.
Downloaded From ManualsPrinter.com Manuals
"Guidelines" on page 2-28
"Printing Transparencies from Trays 1-4" on page 2-28
Videos are available with instructions for loading transparencies. Videos are
located on the User Documentation CD-ROM and at
4500support.
Remove all paper before loading transparencies in the tray.
Do not load transparencies above the fill line; it may cause the printer to jam.
Handle transparencies by the edges using both hands to avoid fingerprints and creases
which can cause poor print quality.
Do not use transparencies with stripes on the side.
Change the paper type at the front panel for all trays.
Use Xerox Clear Transparencies; print quality may vary with other transparencies.
on the User Documentation CD-ROM.
Pull the tray completely out of the printer.
Copyright © 2004 Xerox Corporation. All Rights Reserved.
Phaser™ 4500 Laser Printer
Reference/Printing/Supported
4500-001
2-28
www.xerox.com/office/

Advertisement

Table of Contents
loading

Table of Contents