Reporting; Figure 9 Reporting Configuration Window - Xerox DocuPrint N4025 User Manual

Disabling

Reporting

Standard
Report Polling
PrinterMap User Guide
Reporting
The Reporting Configuration window allows customizing of how often printers are
queried for reporting information and what information is included when
generating printer reports. PrinterMap' s reporting function may also be disabled.

Figure 9 Reporting Configuration window

A disable button is located at the very top of the Reporting Configuration window.
This allows the user to enable or disable PrinterMap' s Reporting functionality. If
the intention is to use PrinterMap only as a status manager for printers, or
PrinterMaps' s significant disk space requirements for reporting cannot be met, this
function may be disabled. Doing do deletes all existing reporting data.
A Disable button is located at the top of the Reporting Configuration window.
This allows enabling or disabling of PrinterMap's Reporting functionality. The
disable function may be deleted if PrinterMap is used solely as a status manager
for printers or if it cannot meet PrinterMap's significant disk space requirements
for reporting. Deleting the disable function deletes all existing reporting data.
Beneath the Disable button is the Standard Report Polling section of the Reporting
Configuration window. This section is used to specify how often data is collected.
It also specifies when data collection starts for generating standard reports. The
selected Standard Report Polling Interval determines how much control exists to
specify the Standard Report Polling Interval Start values. For example, if Hourly
is checked, the status poll begins gathering data at the top of every hour. Start
values need not be specified. If Weekly is selected the Hour and Day of Week
Start values must be specified.
18