Xerox DocuPrint N4025 User Manual page 110

XPD011
XPD012
PrinterMap User Guide
NOTE: Routers may be configured to only maintain IP addresses in
their ARP cache for a very short time. This can adversely affect the
PrinterMap discover process which uses SNMP queries to retrieve the
ARP cache of the router. The result can be that no printers are found via
this discover method.
Text
No printers discovered for IP range, $ip_address1 - $ip_address2
Variables
$ip_address1 - The FROM address of the IP address range
$ip_address2 - The TO address of the IP address range
Description
PrinterMap is configured to discover the specified IP address range, however, no
printers were discovered. This is strictly an informational message, the discover
process did not detect any errors.
System Action
None
User Action
Verify the specified IP address range does have SNMP capable network printers
which should have been discovered. Use the "ping" command from a DOS prompt
to verify the printer(s) is/are responding. Verify that the default SNMP time-out
values specified in the user's guide are adequate.
Text
No printers discovered for IPX preferred server $name
Variables
$name - Configured IPX preferred server name
Description
PrinterMap is configured to discover the specified IPX preferred server, however,
no printers were discovered. This is strictly an informational message, the discover
process did not detect any errors.
System Action
None
User Action
Verify that the specified IPX preferred server is configured properly and has
SNMP capable network printers as clients. Verify that the default SNMP time-out
values specified in the user's guide are adequate.
94