XPD009
XPD010
PrinterMap User Guide
verify the printer(s) is/are responding. Verify the default SNMP time-out values
specified in the user's guide are adequate.
Text
No printers discovered for default gateway, ip: $ip_address
Variables
$ip_address - IP address of local machine's default gateway
Description
PrinterMap is configured to discover the specified default gateway, however, no
printers were discovered. This is strictly an informational message, the discover
process does not detect any errors.
System Action
None
User Action
Verify the specified default gateway does have SNMP capable network printers
which should have been discovered. Use the "ping" command from a DOS prompt
to verify the printer(s) is/are responding. Verify that the default SNMP time-out
values specified in the user's guide are adequate.
NOTE: Routers may be configured to only maintain IP addresses in their ARP
cache for a very short time. This can adversely affect the PrinterMap
discover process which uses SNMP queries to retrieve the ARP cache of
the router. The result can be that no printers are found via this discover
method.
Text
No printers discovered for router, ip: $ip_address
Variables
$ip_address - IP address of secondary router
Description
PrinterMap is configured to discover the specified router, however, no printers
were discovered. This is strictly an informational message, the discover process
did not detect any errors.
System Action
None
User Action
Verify that the specified router does have SNMP capable network printers which
should have been discovered. Use the "ping" command from a DOS prompt to
verify the printer(s) is/are responding. Verify the default SNMP time-out values
specified in the user's guide are adequate.
93