Figure 28 Edit Serial Number Window - Xerox DocuPrint N4025 User Manual

paper and toner descriptions and units are retrieved and displayed from the printer.
If this information is unavailable the paper and toner description defaults to
"Source N" and units defaults to "units".
The third portion of the
MAC Address, Serial Number, and Community String used by the printer.
Note that underneath the Serial Number value is an Edit button which brings up
the

Figure 28 Edit Serial Number window

The existing serial number for the selected printer is displayed in the serial number
edit box. Enter the new serial number in the edit box and select OK to save the
change. PrinterMap sends a SNMP request to the printer with the new serial
number. Note that the serial changed in this manner cannot be canceled by
canceling the Properties window. Select Cancel to dismiss the window without
making any changes.
NOTE: Serial numbers and serial number manipulation are available only for Xerox
Refer to "Launch Application" in Chapter 4 for more information on launching
configured management applications.
PrinterMap User Guide
Properties window
.
Edit Serial Number window
manufactured printers. The bottom window section allows configuration for
up to three management application paths. Only the active application can
be launched (i.e., the application visible in the Printer Management
Application edit field). PrinterMap attempts automatically filling in one or
more application paths when the printer is discovered. Typically these paths
are the vendor specific printer management application or the HTTP address
of the printer's internal web server. A Browse button is provided for
executable and Launch locations. This Application button initiates the
application. Any application may be entered, including parameters, not
exceeding 256 characters.
lists the IP Address, IPX Address,
50