Factory Reset; Midi; Supported Midi Commands - Mooer GE1000 Owner's Manual

Factory reset

If required, settings can be partially or fully restored to factory values.
Open the GOBAL SETTINGS screen, scroll down to FACTORY RESET and
select the settings you want to re-set. Click RESET to confirm.
•
Presets: Only the preset data will be restored to factory
settings. All sounds you may have created or imported after
purchasing the GE1000 will be deleted.
•
Global Settings: Personalized settings such as screen
brightness, preference settings, MIDI mappings, USB audio
settings, trails and language settings will be restored to factory defaults.
•
MNRS/IRS: All imported MNRS samples as well as GIR and IR sample data will be deleted.
•
Looper audio: All audio recordings made with the Looper function will be deleted.
The GE1000 is equipped with a 5-pin MIDI interface, and can be configured to send MIDI commands
(MIDI OUT) or to receive them (MIDI IN). MIDI settings are global settings and apply to all presets.
Open the Settings screen by pressing the SETTINGS knob or by clicking the settings icon and scroll
down to the MIDI settings.
Select "Controller" to configure the GE1000 as a MIDI controller, sending commands to other
connected MIDI devices to control preset switching and other functions.
Select "Slave" to configure the GE1000 as a controlled device that receives control commands from
other MIDI devices.

Supported MIDI commands

MIDI command
Channel
MIDI Note
Program Change (PC)
Continuous Control (CC)
Synchronization
other

MIDI

Send
1 -16
Not supported
supported
Not supported
MIDI Clock supported
Not supported
Receive
1- 16, Omni
Not supported
supported
supported
MIDI Clock supported
Not supported
44