Changing Effect Positions - Mooer GE1000 Owner's Manual

Intelligent multi-effects

Table of Contents

Option 2: Select a module on the touch screen (highlighted by a frame) and press the SELECT knob to

activate / deactivate the module.

Option 3: Press the physical module button corresponding to the desired module. The first press

opens the parameter editing interface. Every subsequent press on the same button toggles the

selected module on/off.

For more options to activate/deactivate effect modules while playing, see Toe switch mapping for

the EXP1 pedal, CTRL or MIDI.

Changing effect positions

The sequence of modules the signal has to pass through in the effect chain has an effect on the

resulting sound. Changing the relative order of the modules in the effect chain is therefore not only a

question of operational convenience, but also important for achieving the desired sound.

Option 1: On the touch screen: use your finger to drag the module to the desired position in the

chain. Should the desired position already be occupied, the other modules in the chain will

automatically shift out of the way to the next available position.

Table of Contents

Ge1000 li