Factory Reset - Mooer GEM Box Owner's Manual

Factory Reset function will initialize all setting of GEM Box. All the user
patches will be erased and overwritten by the preset patches.
To do the factory reset, conform to the following instructions:
Before power on, set the Module Selector to [PLAY], hold down the
[PATCH -] and [PATCH +] footswitch and the [VALUE] button
simultaneously, and then power to the GEM Box,
display and last flashing.
NR/CAB
EQ MODULATION
GAIN
DRIVE
COMP/WAH
PEDAL
PATCH LEVEL
RHYTHM STORE
PLAY
At that time, press [VALUE] button to confirm,
faster speed for 2 seconds, then turn to display
for 3 second, then back to the normal state, the factory reset operation
have been done.
PRESS
VALUE
Note: If you want to quit Factory Reset halfway, move the Module Selector to
another location, then the Factory Reset will be canceled.

Factory Reset

RATE
DELAY
VALUE
D.TIME
REVERB
DECAY
BANK PATCH
# EDIT
FASTER FLASHING
2 SECONDS
PLAY / STOP
HOLD
PATCH
BYPASS / TUNER
HOLD FOR MUTE TUNING
BANK
#
3 SECONDS
17
will appear on the
MODULE BYPASS
BANK
will be flashing in a
at a steady status
PATCH
BANK
EDIT
PATCH
# EDIT
PATCH
# EDIT