Global Settings; Global Input Settings; Global Output Settings - Mooer GE1000 Owner's Manual

GLOBAL SETTINGS

The GLOBAL SETTINGS screen can be accessed by pressing the SETTINGS button or by clicking the
settings icon at the bottom of the Edit View. Other global settings can be accessed by clicking the
input or output indicators on the upper edge of the Edit View.
Return to the previous screen by clicking the "X" in the upper right corner or by pressing the HOME
button.

Global input settings

Click the input level indicator in the Edit View to open the global input settings screen.
The INPUT gain can be adjusted on the left side of the pop-up window. Use it to compensate for
strong signals from instrument pickups with different output characteristics or from signal amplifying
pedals (boost, overdrive, distortion ...) in front of the GE1000.
You can get visual confirmation of the input level by watching the input level indication bar on the
screen or by watching the input level LED at the beginning of the row of physical effect module
buttons.
A green indication is OK, a red indication means that the input signal is clipping i.e. distorted.
Note: Adjusting the global input level can prevent input distortion caused by exceedingly powerful
input signals.
Use the global NOISE REDUCER feature to adjust the noise floor according to the requirements of
different environments. This can eliminate the need for tedious preset by preset adjustments.

Global output settings

Click the output indicator in the Edit View to open the global output settings screen.
You can get visual confirmation of the output level at the end of the effect chain by watching the
output level indication bars on the screen or by watching the output level LED at the end of the row
of physical effect module buttons.
A green indication is OK, a red indication means that the output signal is clipping i.e. distorted.
40